Envío en el mismo día hasta las 18:00 CEST los días laborables
Posibilidad de pago mediante factura
Siga su pedido con track & trace
Distribuidor oficial de Schaeffler
Cargando equivalentes
Especificaciones principales
Disponibilidad2 Pzas.
MarcaINA
Número de artículoLSL192332-TB-N1-C3 INA
También se conoce como
0546809640030
EAN4054363034666
CategoríaRodamiento de una hilera de rodillos cilíndricos
Peso y dimensiones
Interior (d) mm
160,00
Exterior (D) mm
340,00
Ancho (B) mm
114,00
Interior (d) pulgadas
6.2992
Exterior (D) pulgadas
13.3858
Ancho (B) pulgadas
4.4882
Peso (kg)
48.1
Propiedades del producto
Agujero
C - Agujero cilíndrico
Junta
Sin junta
Jaula
S - Jaula estándar o de acero
Modificación externa
N1 - 1 Ranura de bloqueo en anillo exterior
Juego radial interno
C3 Juego interno (Mayor que Cn)
Precisión
Precisión estándar
Estabilización térmica
Sin estabilización térmica - Temperaturas de hasta 120 ºC
Datos de Schaeffler (medias)
ECLASS number
23-05-09-01
ECLASS2 number
23-05-09-01
Descripción del sufijo
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
N1One Locating Slot (Notch) In One Outer Ring Side Face Or Housing Washer