Expéditionle jour meme jusqu'à 18 h 00 CEST les jours ouvrables
Paiement par facture possible
Suivez votre commande avec Suivre & tracer
Distributeur officiel Schaeffler
Chargement des équivalents
Principales caractéristiques
Disponibilité2 pcs
MarqueINA
Numéro d'articleSL185038-TB-C3-2S INA
Également appelé
0572440140034
SL185038-TB-C3 (2 PCS)
EAN4054366757951
CatégorieRouleau cylindrique à double rangée
Poids et dimensions
Intérieur (d) mm
190,00
Extérieur (D) mm
290,00
Largeur (B) mm
136,00
Intérieur (d) pouces
7.4803
Extérieur (D) pouces
11.4173
Largeur (B) pouces
5.3543
Poids (kg)
31.3
Propriétés du produit
Alésage
C – Alésage cylindrique
Joint
Aucun joint
Type de cage
FC – à rouleaux jointifs, sans cage
Modification externe
Aucun Modification Externe
Jeu radial interne
C3 Air intérieur (supérieur à Cn)
Précision
Set of Two for Side-by-Side
Stabilisation thermique
Aucune stabilisation thermique - températures jusqu'à 120 °C
Données de Schaeffler (médias)
Largeur (b) mm
136,00
Charge de base statique, radiale (C 0r)
"2600000.0000"
Vitesse limite (n G)
"1320.0000"
Vitesse de référence (n ϑr)
"770.0000"
ECLASS number
23-05-09-01
ECLASS2 number
23-05-09-01
Description du suffixe
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimized And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
C3Internal Clearance Larger Than Normal
2SBearings Matched In Set Of Two For Side-By-Side Mounting, Tolerance Is Matched Based On The Inner, Outer And Clearance Of The Bearing