Ook bekend als
LSL192318-TB-C4
NJ2318-E-MPAX-ILR-C4
NJ2318-E-XL-MPAX-ILR-C4
CategorieEenrijig cilinderrollager
Gewicht en afmetingen
Binnenmaat (d) mm
90
Buitenmaat (D) mm
190
Breedte (B) mm
64
Binnenmaat (d) inch
3.5433
Buitenmaat (D) inch
7.4803
Breedte (B) inch
2.5197
Gewicht (kg)
8.6
Producteigenschappen
Boring
C - cilindrische boring
Afdichting
Geen afdichting
Type kooi
S - stalen of standaard kooi
Externe aanpassing
Geen Externe Aanpassing
Interne radiale speling
C4 interne speling (hoger dan C3)
Precisie
Standaardprecisie
Warmtestabilisatie
Geen warmtestabilisatie - temperaturen tot 120 °C
Suffix-omschrijving
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
