Número do artigo1208K C3 Deutsche Kugellager Fabrik
CategoriaRolamento autocompensador de esferas
Peso e dimensões
Interno (d) mm
40,00
Externo (D) mm
80,00
Largura (B) mm
18,00
Interno (d) polegadas
1.5748
Externo (D) polegadas
3.1496
Largura (B) polegadas
0.7087
Peso (kg)
0.417
Características do produto
Furo
K - furo cônico, conicidade 1:12 (standard para a maioria dos rolamentos)
Vedação
Sem vedação
Tipo de gaiola
S - gaiola de aço ou standard
Folga radial interna
Folga radial interna C3 (maior que Cn)
Precisão
Precisão standard
Lubrificação
Lubrificação standard
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
KTapered Bore, Taper 1:12
C3Internal Clearance Larger Than Normal
Descrição do produto
The 1208K C3 Deutsche Kugellager Fabrik belongs to the group of double-row self-aligning deep-groove ball bearings. This bearing type without a seal is a double-row bearing. Both rows are housed in a spherical raceway in the outer ring. This construction allows the bearing to be self-aligning. This means that any misalignment of the shaft relative to the bearing housing does not adversely affect performance.
These features make the 1208K C3 Deutsche Kugellager Fabrik highly suitable for applications where substantial misalignment or shaft deflections may occur. Also, self-aligning bearings have the lowest friction of all rolling-element bearings. Even at higher speeds, there is only limited frictional heat. These bearings are capable of handling high radial loads. To a lesser extent, they can be axially loaded in both directions.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.