Também conhecido como
22332-BE-K-C4
22332CCKJA/W33VA405
22332-E1-K-C4
CategoriaRolamento autocompensador de rolos
Peso e dimensões
Interno (d) mm
160,00
Externo (D) mm
340,00
Largura (B) mm
114,00
Interno (d) polegadas
6.2992
Externo (D) polegadas
13.3858
Largura (B) polegadas
4.4882
Peso (kg)
49.4
Características do produto
Furo
K - furo cônico, conicidade 1:12 (standard para a maioria dos rolamentos)
Melhoria da lubrificação
W33 - ranhura e 3 furos para lubrificação
Vedação
Sem vedação
Tipo de gaiola
S - gaiola de aço ou standard
Folga radial interna
Folga radial interna C4 (maior que C3)
Precisão
Precisão standard
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Versão para peneira vibratória
Configuração para peneira vibratória
Descrição do sufixo
E1Increased Capacity Design
KTapered Bore, Taper 1:12
JPAPressed Steel Window-Type Cage; Guidance By The Inner Ring (Supporting Ring)
T41ASpherical Roller Bearings For Vibrating Screens (C4 Clearance), Old Designation is C4.F80
Descrição do produto
The 22332-E1-K-JPA-T41A FAG is a spherical roller bearing. This bearing type has a solid inner ring, which runs on two rows of symmetrical rollers in a solid outer ring. The outer ring has a concave, spherical raceway. This design compensates for any alignment errors and shaft deflections. Spherical roller bearings can withstand particularly high radial loads. Additionally, they can accommodate axial forces in both directions. These bearings are used in elevators, textile machines, food processing machines, cranes etc.
The 22332-E1-K-JPA-T41A FAG is an X-life type bearing. X-life bearings provide better performance than normal spherical roller bearings due to a special internal construction. Contact surfaces, steel grade and rolling bodies are of a higher quality. X-life bearings combine a higher load capacity with a longer service life. The bearings generate less heat and allow for higher speeds. Finally, X-life bearings allow for longer maintenance intervals compared to normal spherical roller bearings.
The 22332-E1-K-JPA-T41A FAG is designed for use in vibrating machines such as road rollers, saw frames and vibratory screens. This particularly robust bearing can withstand very high loads, speeds, accelerations, and centrifugal forces. Dynamic angular misalignments up to 0.15° can be supported. Also, the 22332-E1-K-JPA-T41A FAG is resistant to dirt and moisture. This bearing guarantees top performance under demanding operating conditions.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.