CategoriaRolamento axial de esferas de escora simples
Peso e dimensões
Interno (d) mm
600
Externo (D) mm
710
Largura (B) mm
85
Interno (d) polegadas
23.622
Externo (D) polegadas
27.9528
Largura (B) polegadas
3.3465
Peso (kg)
65
Características do produto
Tipo de gaiola
S - gaiola de aço ou standard
Precisão
Precisão P6 (maior que standard)
Descrição do sufixo
FMachined Steel Or Special Cast Iron Cage, Rolling Element Centered; Different Designs Or Material Grades Are Identified By A Figure Following The F, e.g. F1
P6Dimensional And Running Accuracy To ISO Tolerance Class 6 (Better Than Normal)
Descrição do produto
The 511/600F/P6 SKF belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly. Thrust ball bearings have an open design. The balls make them suitable for high rotational speeds.
Single direction thrust ball bearings can only be loaded axially in one direction. A shaft can be locked in one direction this way. Radially, they must not be loaded. The shaft ring is attached to the shaft. This ring rotates along with the shaft. The housing ring has a slightly larger bore diameter, allowing the shaft to pass with some clearance.
As thrust ball bearings can be disassembled, the components can easily be mounted separately. Be careful not to mix up the shaft and housing ring when you are assembling the bearing. The housing ring of the 511/600F/P6 SKF has a flat seat. As a result, this bearing cannot compensate for any misalignment between the shaft and housing.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
