Pedidos feitos antes das 18h CEST serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade1 unid.
MarcaElges
Número do artigoGAKFL16PB Elges
Também conhecido como
SABPL16S
SALKAC16M
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
16,00
Externo (D) mm
43,00
Largura (B) mm
21,00
Interno (d) polegadas
0.6299
Externo (D) polegadas
1.6929
Largura (B) polegadas
0.8268
Peso (kg)
0.19
Características do produto
Vedação
Sem vedação
Material de contato
Aço sobre bronze
Descrição do sufixo
PBSliding Contact Surface Steel/Bronze, To ISO 12 240-1, Dimension Series K, For Shafts From 5mm To 30mm
Descrição do produto
The GAKFL16PB Elges is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GAKFL16PB Elges has a spherical plain bearing with a steel-on-bronze sliding contact. The steel inner ring contacts the bronze surface of the outer ring. The steel-on-bronze sliding contact makes this bearing highly wear-resistant, providing low friction. However, the load capacity is slightly lower compared to spherical plain bearings with steel-on-steel sliding contacts. This bearing needs regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.