Pedidos feitos antes das 18h CEST serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade35 unid.
MarcaINA
Número do artigoGAKL10-PW-A INA
Também conhecido como
0066333150000
SALKB10F
EAN4012802523980
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
10,00
Externo (D) mm
29,00
Largura (B) mm
14,00
Interno (d) polegadas
0.3937
Externo (D) polegadas
1.1417
Largura (B) polegadas
0.5512
Peso (kg)
0.054
Características do produto
Vedação
Sem vedação
Material de contato
Aço sobre PTFE
Dados da Schaeffler (medias)
Diâmetro externo do rolamento (D) mm
22,00
Diâmetro do olho externo (d 2) mm
28,00
Fator de carga radial estática C0r (N)
18500
Largura do anel interno (B) mm
14,00
Fator de carga radial dinâmica Cr (N)
18100
Fator de carga estática básica, radial (C 0r)
"18500.0000"
Comprimento total da rosca externa da haste (l 2) mm
62,00
Número ECLASS
23-05-01-05
Número ECLASS2
23-05-01-05
Descrição do Medias
Rod end GAKL..-PW, external threads, maintenance-free
Descrição do sufixo
PWSliding Contact Surface Steel/PTFE (Polyetrafluoroethylene) Bronze Film
AThe Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)
The GAKL10-PW-A INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GAKL10-PW-A INA has a spherical plain bearing with a steel-on-PTFE sliding contact, making it maintenance-free. PTFE is a special plastic. During the run-in period of these plain bearings, particles of PTFE are deposited on the opposite running surface. They fill in the small irregularities of the inner ring surface, creating a smooth surface. As a result, the components fit each other perfectly.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.