Pedidos feitos antes das 18h CEST serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
A carregar equivalentes
Especificações
Disponibilidade1 unid.
MarcaLS
Número do artigoGAL35DO-2RS LS
Também conhecido como
GAL30ES-2RS
SAL35ES-2RS
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
35,00
Externo (D) mm
84,00
Largura (B) mm
25,00
Interno (d) polegadas
1.3780
Externo (D) polegadas
3.3071
Largura (B) polegadas
0.9843
Peso (kg)
1.3
Características do produto
Vedação
2RS - vedação de borracha em ambos os lados
Material de contato
Aço sobre aço
Descrição do sufixo
2RSRubber Seals At Each Side Of The Bearing
Descrição do produto
The GAL35DO-2RS LS is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GAL35DO-2RS LS has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.