Pedidos feitos antes das 18h CEST serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade16 unid.
MarcaINA
Número do artigoGAR25-DO INA
Também conhecido como
0066340790000
GAR25ES
SA25ES
TFE25MK
EAN4012802525106
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
25,00
Externo (D) mm
64,00
Largura (B) mm
20,00
Interno (d) polegadas
0.9843
Externo (D) polegadas
2.5197
Largura (B) polegadas
0.7874
Peso (kg)
0.5672
Características do produto
Vedação
Sem vedação
Material de contato
Aço sobre aço
Dados da Schaeffler (medias)
Diâmetro externo do rolamento (D) mm
42,00
Fator de carga radial estática C0r (N)
88300
Largura do anel interno (B) mm
20,00
Fator de carga radial dinâmica Cr (N)
48300
Fator de carga estática básica, radial (C 0r)
"88300.0000"
Número ECLASS
23-05-01-05
Número ECLASS2
23-05-01-05
Descrição do Medias
Rod end with external thread, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-4, dimension series E, type M, open
The GAR25-DO INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GAR25-DO INA has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.