Também conhecido como
0066345080000
SIQG20ES
TAPR20CE
EAN4012802525540
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
20,00
Externo (D) mm
47,00
Largura (B) mm
20,00
Interno (d) polegadas
0.7874
Externo (D) polegadas
1.8504
Largura (B) polegadas
0.7874
Peso (kg)
0.35
Características do produto
Vedação
Sem vedação
Material de contato
Aço sobre aço
Dados da Schaeffler (medias)
Folga radial (G r)
"0,03 - 0,082"
Diâmetro externo do rolamento (D) mm
35,00
Fator de carga radial estática C0r (N)
41500
Fator de carga radial dinâmica Cr (N)
29600
Fator de carga estática básica, radial (C 0r)
"41500.0000"
Número ECLASS
23-05-01-05
Número ECLASS2
23-05-01-05
Descrição do Medias
Hydraulic rod end, with thread clamping device, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN 24338 ISO 6982, open design
Descrição do sufixo
LOSliding Contact Surface Is Steel/Steel, Inner Ring Extended On Both Sides, Single Axial Split In Outer Ring
BThe Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)
The GIHNRK20-LO-B INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GIHNRK20-LO-B INA has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.