Pedidos feitos antes das 18h CEST serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade267 unid.
MarcaINA
Número do artigoGIR20-DO INA
Também conhecido como
0066354660000
GIR20ES
SI20ES
TFI20FK
EAN4012802526837
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
20,00
Externo (D) mm
54,00
Largura (B) mm
16,00
Interno (d) polegadas
0.7874
Externo (D) polegadas
2.1260
Largura (B) polegadas
0.6299
Peso (kg)
0.34
Características do produto
Vedação
Sem vedação
Material de contato
Aço sobre aço
Dados da Schaeffler (medias)
Diâmetro externo do rolamento (D) mm
35,00
Fator de carga radial estática C0r (N)
75600
Largura do anel interno (B) mm
16,00
Fator de carga radial dinâmica Cr (N)
29600
Fator de carga estática básica, radial (C 0r)
"75600.0000"
Número ECLASS
23-05-01-05
Número ECLASS2
23-05-01-05
Descrição do Medias
Rod end with internal thread, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-4, dimension series E, type F, open design
The GIR20-DO INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GIR20-DO INA has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.