Pedidos feitos antes das 18h CEST serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade13 unid.
MarcaElges
Número do artigoGIR6-DO Elges
Também conhecido como
GIR6ES
SI6E
TFI6FK
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
6,00
Externo (D) mm
21,00
Largura (B) mm
6,00
Interno (d) polegadas
0.2362
Externo (D) polegadas
0.8268
Largura (B) polegadas
0.2362
Peso (kg)
0.02
Características do produto
Vedação
Sem vedação
Material de contato
Aço sobre aço
Descrição do sufixo
DOSteel/Steel & Inner And Outer Ring Hardened
Descrição do produto
The GIR6-DO Elges is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GIR6-DO Elges has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.