Pedidos feitos antes das 18h CEST serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade2 unid.
MarcaINA
Número do artigoLSL192336-TB INA
Também conhecido como
0546840560000
NJ2336-EX-TB-MPAX-ILR
NJ2336-EX-TB-XL-MPAX-ILR
EAN4054363034727
CategoriaRolamento de rolos cilíndricos
Peso e dimensões
Interno (d) mm
180,00
Externo (D) mm
380,00
Largura (B) mm
126,00
Interno (d) polegadas
7.0866
Externo (D) polegadas
14.9606
Largura (B) polegadas
4.9606
Peso (kg)
67.4
Características do produto
Furo
C - furo cilíndrico
Vedação
Sem vedação
Tipo de gaiola
S - gaiola de aço ou standard
Modificação externa
Sem modificação externa
Folga radial interna
Folga radial interna normal - Cn
Precisão
Precisão standard
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Dados da Schaeffler (medias)
Fator de carga radial estática C0r (N)
2430000
Fator de carga radial dinâmica Cr (N)
1840000
Número ECLASS
23-05-09-01
Número ECLASS2
23-05-09-01
Descrição do Medias
Cylindrical roller bearing, LSL1923 with disc cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, 1 disc cage, type LSL1923
Descrição do sufixo
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower