Pedidos feitos antes das 19h CET serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade1 unid.
MarcaFAG
Número do artigoNJ406M1A.C4.BL FAG
CategoriaRolamento de rolos cilíndricos
Peso e dimensões
Interno (d) mm
30
Externo (D) mm
90
Largura (B) mm
23
Interno (d) polegadas
1.1811
Externo (D) polegadas
3.5433
Largura (B) polegadas
0.9055
Peso (kg)
0.848
Características do produto
Furo
C - furo cilíndrico
Vedação
Sem vedação
Tipo de gaiola
MA - gaiola de latão, guiada no anel externo
Modificação externa
Sem modificação externa
Folga radial interna
Folga radial interna C4 (maior que C3)
Precisão
A0 - Inner Ring Crowned Raceway
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
M1ASolid Brass Cage, Two-Piece, Rib-Guided On Outer Ring
C4Bearing Internal Clearance Greater Than C3
BLCylindrical Roller Bearing With Crowned Raceway On Inner Ring Or Outer Ring. Taper Bearing With Crowned Raceway On Inner Ring. Notice: All Cylinder Rollers And Taper Rollers Have Light Curved Coated Lines
Descrição do produto
The NJ406M1A.C4.BL FAG is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single-row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install. Applications of single-row cylindrical roller bearings include gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NJ406M1A.C4.BL FAG is a single-row cylindrical bearing with NJ design. The outer ring has two rigid ribs, while the inner ring has one rigid rib. As a result, NJ bearings can support radial forces as well as axial forces in a single direction. This bearing type is used as a support bearing. Support bearings allow axial displacement of the shaft relative to the housing in one direction. The shaft is located axially in the other direction. NJ bearings can also be used as locating bearings by combining them with HJ angle rings (available separately). Locating bearings are used to locate a shaft axially in both directions.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
