Também conhecido como
GAR35DO
GAR35ES
SA35E
SAA35ES
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
35
Externo (D) mm
82
Largura (B) mm
25
Interno (d) polegadas
1.378
Externo (D) polegadas
3.2283
Largura (B) polegadas
0.9843
Peso (kg)
1.41
Características do produto
Vedação
2RS - vedação de borracha em ambos os lados
Material de contato
Aço sobre PTFE
Descrição do sufixo
ETThrough Hardened And Ground Steel Fractured At One Point
2RSDouble-Lip Rubbing Seals Of Metric Bearings Are Made Of Polyester Elastomer (-30 ~ 130°C). Inch-Size Bearings Are Made Of Polyurethane (-20 ~ 80°C)
Descrição do produto
The SA35ET 2RS LS is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The SA35ET 2RS LS has a spherical plain bearing with a steel-on-PTFE sliding contact, making it maintenance-free. PTFE is a special plastic. During the run-in period of these plain bearings, particles of PTFE are deposited on the opposite running surface. They fill in the small irregularities of the inner ring surface, creating a smooth surface. As a result, the components fit each other perfectly.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
