Pedidos feitos antes das 18h CET serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
A carregar equivalentes
Especificações
Disponibilidade1 unid.
MarcaSKF
Número do artigoSALA45TE-2RS SKF
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
45
Externo (D) mm
102
Largura (B) mm
32
Interno (d) polegadas
1.7717
Externo (D) polegadas
4.0157
Largura (B) polegadas
1.2598
Peso (kg)
2.615
Características do produto
Vedação
2RS - vedação de borracha em ambos os lados
Material de contato
Aço sobre PTFE
Descrição do sufixo
TEOuter Ring Of Carbon Chromium Steel, Fractured, Hardened And Ground, With Sliding Surface Of PTFE Fabric. Inner Ring Of Carbon Chromium Steel, Hardened And Ground, Sliding Surface Hard Chromium Plated
2RSDouble-Lip Rubbing Seals Of Metric Bearings Are Made Of Polyester Elastomer (-30 ~ 130°C). Inch-Size Bearings Are Made Of Polyurethane (-20 ~ 80°C)
Descrição do produto
The SALA45TE-2RS SKF is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The SALA45TE-2RS SKF has a spherical plain bearing with a steel-on-PTFE sliding contact, making it maintenance-free. PTFE is a special plastic. During the run-in period of these plain bearings, particles of PTFE are deposited on the opposite running surface. They fill in the small irregularities of the inner ring surface, creating a smooth surface. As a result, the components fit each other perfectly.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
