Suffix description

• B 25° Contact Angle
• 2ZR Metal Shields At Each Side Of The Bearing
• S Lubrication Hole In Inner Ring
• TNG Cage Made Of Glass-Fibre Reinforced Polyamide 66
• SO Unknown
• YRLN
• YRL Lubricant, Operating Temperature -30 ~ 120°C
• N Normal Filling 35%
• 6 Standard Bulk Pack Of Rolls. Shrink Wrapped. Bearings Are Roll Wrapped In Hizex Film And Placed In Cardboard Outer Carton That Is Polystrene & Cardboard Filled. For Bearings Of 6000-Series Or Smaller, Two Hizex Rolls Are Packed Into Small Cardboard Boxes, And These Boxes Are Then Placed In The Cardboard Outer Carton

Product description

The LZ3207B-2ZRSTNGSO YRLN6 NSK is a ball-bearing Yoke type track roller, of which the rolling elements combine low friction with high precision. Track rollers are designed for use with various types of tracks. Thanks to a thick-walled outer ring, they can withstand high radial loads. Axial loads due to alignment errors or misalignment can be absorbed in both directions. Yoke type track rollers are suitable for mounting on a shaft. They are not mounted in a housing bore, but a flat (counter) track provides support.

The LZ3207B-2ZRSTNGSO YRLN6 NSK is equipped with a cage that prevents the rolling elements from coming into contact with each other. This design allows for a controlled movement of the rolling elements. There is lower friction compared to full complement track rollers, allowing for higher rotational speeds and less heat generation. Common applications of support rollers include conveyor systems, linear guidance systems, and cam mechanisms.