Home Cylindrical Roller Bearing Single Row NUP332-E-M1 FAG

NUP332-E-M1 FAG

Cylindrical Roller Bearing

no product image available
Loading equivalents

Product properties

Downloads & Links

Details

Category information NUP332-E-M1 FAG

Single row cylindrical roller bearings with cage, like the NUP332-E-M1 FAG, are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies.

The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling.

The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs.

The bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process.

Applications of NUP332-E-M1 FAG

Product specifications NUP332-E-M1 FAG

Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity.

NUP332-E-M1 FAG is a locating bearing

Cylindrical roller bearings NUP are locating bearings. They can support not only high radial forces but also axial forces in both directions and can therefore guide shafts axially in both directions.

Bearings with rib washer: Type NUP has two ribs on the outer ring and one rigid rib on the inner ring. A loose rib washer is fitted on the opposite side.

Sealing of NUP332-E-M1 FAG

The bearings are supplied without seals.

Lubrication of NUP332-E-M1 FAG

They can be lubricated from the end faces using grease or oil.

Operating temperature of NUP332-E-M1 FAG

Single row cylindrical roller bearings with cage can be used at operating temperatures from –30 °C to +150 °C.

Cage of NUP332-E-M1 FAG

The suffix M1 indicates bearings with brass cages guided by rollers.

Suffix info NUP332-E-M1 FAG