Name: HSS7008-C-T-P4S-UL FAG
Brand: FAG

Specifications

Availability 15 pcs
Brand FAG
Item Number HSS7008-C-T-P4S-UL FAG
Manufacturer Part Number 0384400400000
EAN 4012801489850
Category Angular Contact Ball Bearing Single Row

Weight and Dimensions

Inner (d) MM 40
Outer (D) MM 68
Width (B) MM 15
Inner (d) Inch 1.5748
Outer (D) Inch 2.6772
Width (B) Inch 0.5906
Weight (kg) 0.21

Product Properties

Seal 2RU - Two Seals / Non Contact Type
Cage Type TB - Hard Fiber Cage
Precision P4S Precision (Higher than P4)
Contact Angle 15 degrees
Pairing G - Universal Pairing
Axial Internal Clearance / Preload UL - Universal design for fitting in pairs, bearing pair has slight preload in O and X arrangements
Lubrication Standard Lubrication

Data from Schaeffler (medias)

Width (b) mm 15
Radial Static Load Rating C0r (N) 5700
Radial Dynamic Load Rating Cr (N) 9400
Limiting speed for grease lubrication (n G Grease) 30000
ECLASS number 23-05-08-03
ECLASS2 number 23-05-08-03
Medias description Spindle bearings HSS70..-C, adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances

Suffix description

C 15° Or 17° Contact Angle
T Textile Laminated Phenolic Resin, Outer Ring Guided. The Cage Is Suitable For Long-Term Operation At Temperatures Up To 100°C
P4S Boundary Dimensions ISO 4, Abec-7, Running Accuracy ISO 2, Abec-9
UL Single Bearing, Universal, Light Preload

Downloads & Links

Link to manufacturer

Product description

The HSS7008-C-T-P4S-UL FAG is a high-speed design spindle bearing. This bearing type has seals on both sides, and small steel balls. The bearing has an internal design with optimised friction and the balls are subjected to very low centrifugal forces. Even at very high speeds, a high degree of rigidity is maintained. This makes the HSS7008-C-T-P4S-UL FAG particularly suitable for use in high-speed- or grinding spindles.

FAG spindle bearings are single-row, angular contact ball bearings that cannot be dismantled. They have solid inner and outer rings as well as ball-and-cage assemblies with solid window cages. Due to their extremely tight tolerances, they are particularly suitable for applications that require high guidance accuracy and suitability for high speeds. Spindle bearings are commonly used for main spindles in machine tools.

In addition, FAG spindle bearings are designed as universal bearings. Universal bearings with the same deviation in inner ring bore and outer diameter can be combined for use in different arrangements. For example, when the load capacity of a single bearing is insufficient, two matching bearings can be used in a tandem arrangement to support axial loads in one direction only. In order to support axial loads in both directions as well as moments, O or X arrangements are good solutions.

HSS7008-C-T-P4S-UL FAG

Angular Contact Ball Bearing Single Row