Orders placed before 7 p.m. CEST will be shipped today
Payment by invoice possible
Track your order with track & trace
Official Schaeffler distributor
Loading equivalents
Specifications
Availability1 pc
BrandFAG
Item NumberHSS7013-E-T-P4S-UL-L298 FAG
CategoryAngular Contact Ball Bearing Single Row
Weight and Dimensions
Inner (d) MM
65
Outer (D) MM
100
Width (B) MM
18
Inner (d) Inch
2.5591
Outer (D) Inch
3.937
Width (B) Inch
0.7087
Weight (kg)
0.47
Product Properties
Seal
2RU - Two Seals / Non Contact Type
Cage Type
TB - Hard Fiber Cage
Precision
P4S Precision (Higher than P4)
Contact Angle
25 degrees
Pairing
G - Universal Pairing
Axial Internal Clearance / Preload
UL - Universal design for fitting in pairs, bearing pair has slight preload in O and X arrangements
Lubrication
Standard Lubrication
Suffix description
E25° Contact Angle
TTextile Laminated Phenolic Resin, Outer Ring Guided. The Cage Is Suitable For Long-Term Operation At Temperatures Up To 100°C
P4SBoundary Dimensions ISO 4, Abec-7, Running Accuracy ISO 2, Abec-9
ULSingle Bearing, Universal, Light Preload
L298High Temperature Grease That, Due To Its Higher Base Oil Viscosity, Is Used At Continuous Temperatures Up To Approx. +110°C
Product description
The HSS7013-E-T-P4S-UL-L298 FAG is a high-speed design spindle bearing. This bearing type has seals on both sides, and small steel balls. The bearing has an internal design with optimised friction and the balls are subjected to very low centrifugal forces. Even at very high speeds, a high degree of rigidity is maintained. This makes the HSS7013-E-T-P4S-UL-L298 FAG particularly suitable for use in high-speed- or grinding spindles.
FAG spindle bearings are single-row, angular contact ball bearings that cannot be dismantled. They have solid inner and outer rings as well as ball-and-cage assemblies with solid window cages. Due to their extremely tight tolerances, they are particularly suitable for applications that require high guidance accuracy and suitability for high speeds. Spindle bearings are commonly used for main spindles in machine tools.
In addition, FAG spindle bearings are designed as universal bearings. Universal bearings with the same deviation in inner ring bore and outer diameter can be combined for use in different arrangements. For example, when the load capacity of a single bearing is insufficient, two matching bearings can be used in a tandem arrangement to support axial loads in one direction only. In order to support axial loads in both directions as well as moments, O or X arrangements are good solutions.
Login
Welcome back! You can login with your ABF account.
