Home Cylindrical Roller Bearing Single Row N208E.M1 FAG

N208E.M1 FAG

Cylindrical Roller Bearing 40x80x18mm

Loading equivalents

Product properties


Category information N208E.M1 FAG

Single row cylindrical roller bearings with cage, like the N208E.M1 FAG, are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling.

The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs.

The bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process.

Applications of N208E.M1 FAG

Product specifications N208E.M1 FAG

Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity.

N208E.M1 FAG is a non-locating bearing

Cylindrical roller bearings N are non-locating bearings and can support radial forces only. Bearings N have two ribs on the inner ring and an outer ring without ribs.

Axial displacement: The outer and inner ring can be axially displaced relative to each other from the central position by the value “s”.

Sealing of N208E.M1 FAG

The bearings are supplied without seals.

Lubrication of N208E.M1 FAG

They can be lubricated from the end faces using grease or oil.

Operating temperature of N208E.M1 FAG

Single row cylindrical roller bearings with cage can be used at operating temperatures from –30 °C to +150 °C.

Cage of N208E.M1 FAG

The suffix M1 indicates bearings with brass cages guided by rollers.

Suffix info N208E.M1 FAG