Also known as
NJ2317E.TVP2.C3
NJ2317E.TVP2.C3.F2.H25
CategoryCylindrical Roller Bearing Single Row
Weight and Dimensions
Inner (d) MM
85,00
Outer (D) MM
180,00
Width (B) MM
60,00
Inner (d) Inch
3.3465
Outer (D) Inch
7.0866
Width (B) Inch
2.3622
Weight (kg)
7.27
Product Properties
Bore
C - Cylindrical Bore
Seal
No Seal
Cage Type
P - Plastic Molded Cage
External Modification
No External Modification
Radial Internal Play
C3 Internal Play (Higher than Cn)
Precision
Standard Precision
Heat Stabilization
No Heat Stabilization - Temperatures up to 120 °C
Suffix description
EIncreased Load Capacity
TVP2Solid Window Cage Made From Glass Fibre Reinforced Polyamide PA66. Roller Riding
C3Internal Clearance Larger Than Normal
F2Production Rule For Cylindrical Roller Bearings And Spherical Roller Bearings For Axle Boxes
H25E Design Cylindrical Roller Bearings With Two Integral Lips At The Outer Ring And With TVP3 Cage
Product description
The NJ2317E.TVP2.C3.F2.H2 FAG is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single-row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install. Applications of single-row cylindrical roller bearings include gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NJ2317E.TVP2.C3.F2.H2 FAG is a single-row cylindrical bearing with NJ design. The outer ring has two rigid ribs, while the inner ring has one rigid rib. As a result, NJ bearings can support radial forces as well as axial forces in a single direction. This bearing type is used as a support bearing. Support bearings allow axial displacement of the shaft relative to the housing in one direction. The shaft is located axially in the other direction. NJ bearings can also be used as locating bearings by combining them with HJ angle rings (available separately). Locating bearings are used to locate a shaft axially in both directions.
Login
Welcome back! You can login with your ABF account.