Home Cylindrical Roller Bearing Single Row NU2205E.M1 FAG

NU2205E.M1 FAG

Cylindrical Roller Bearing 25x52x18mm

Loading equivalents

Product properties

Downloads & Links

Details

Category information NU2205E.M1-FAG

Single row cylindrical roller bearings with cage, like the NU2205E.M1-FAG, are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies.

The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling.

The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs.

The bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process.

Applications of NU2205E.M1-FAG

Product specifications NU2205E.M1-FAG

Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity.

NU2205E.M1-FAG is a non-locating bearing

Cylindrical roller bearings NU are non-locating bearings and can support radial forces only. In series NU, the outer ring has two ribs, while the inner ring has no ribs.

Axial displacement: The outer and inner ring can be axially displaced relative to each other from the central position by the value “s”.

Bearings with L-section ring: Non-locating bearings NU can be combined with an L-section ring HJ to form a semi-locating bearing unit. They must not be installed with two L-section rings (due to the risk of jamming).

Sealing of NU2205E.M1-FAG

The bearings are supplied without seals.

Lubrication of NU2205E.M1-FAG

They can be lubricated from the end faces using grease or oil.

Operating temperature of NU2205E.M1-FAG

Single row cylindrical roller bearings with cage can be used at operating temperatures from –30 °C to +150 °C.

Cage of NU2205E.M1-FAG

The suffix M1 indicates bearings with brass cages guided by rollers.

Suffix info NU2205E.M1-FAG