Also known as
GIL60-DO-2RS
GIL60ES-2RS
SIL60DO-2RS
SIL60ES-2RS
CategoryRod End
Weight and Dimensions
Inner (d) MM
60,00
Outer (D) MM
135,00
Width (B) MM
44,00
Inner (d) Inch
2.3622
Outer (D) Inch
5.3150
Width (B) Inch
1.7323
Weight (kg)
5.5
Product Properties
Seal
2RS - Rubber Seal on Two Sides
Contact Material
Steel on Steel
Suffix description
ESSteel-On-Steel & Oil Holes And Grooves
2RSRubber Seals At Each Side Of The Bearing
Product description
The SIL60ES 2RS LS is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The SIL60ES 2RS LS has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Login
Welcome back! You can login with your ABF account.